Biscuit by 41zero42

Collection Summary

Biscuit by 41zero42 is a white-body ceramic wall tile collection built on a 2×8-inch format. The collection is defined by six geometric surface reliefs, Plain, Dune, Waves, Strip, Stud, and Peak, offered across six matte colorways: Bianco, Terra, Salvia, Notte, Bordeaux, and Powder. What sets Biscuit apart is its use of dimensional relief rather than printed pattern to create visual interest, allowing a single narrow-format tile to read very differently depending on which surface texture is selected and how light hits it.

Design & Aesthetic

Biscuit builds its visual identity through physical surface relief rather than graphic printing. The six textures range from flat (Plain) to strongly three-dimensional (Peak, Waves, Dune), so the same 2×8-inch format can read as a quiet subway tile or an architectural, shadow-casting surface depending on the pattern chosen. Because the reliefs respond to ambient light, an installation can shift in character throughout the day.

The palette stays intentionally restrained: warm neutrals in Bianco and Terra, a muted green in Salvia, a deep tone in Notte, and two accent shades in Bordeaux and Powder. Surfaces can be run consistently for a uniform field or mixed within a single wall to build a more layered, patterned composition.

Material & Craftsmanship

Biscuit is a white-body, single-fired ceramic wall tile finished in matte, produced at an 8 mm thickness. 41zero42 notes that slight variation in shade and caliber should be expected as part of the collection’s intentionally artisanal character, rather than treated as a defect.

Design Applications

Biscuit is a wall product, not a floor tile. Its dimensional surfaces suit applications where texture is meant to read as part of the architecture itself, such as feature or accent walls, rather than serving purely as a background finish. The manufacturer also provides installation guidance for bathrooms and showers, which requires proper substrate waterproofing before installation in wet areas.

Specifying Biscuit

Every Biscuit surface and colorway shares the same 2×8-inch format and 8 mm thickness, which keeps planning straightforward from a sizing standpoint. The bigger specification decision is which relief to use and how it will read once installed. Directional surfaces such as Strip, Dune, Waves, and Peak have a clear pattern orientation, so layout direction should be confirmed before ordering, particularly if multiple reliefs will be combined on one wall.

Because Biscuit is a wall-only product, it should not be specified for flooring. For bathrooms, showers, or other humid environments, follow the manufacturer’s substrate waterproofing guidance rather than treating it as a standard dry-wall installation. Designers should also account for the natural shade and caliber variation inherent to the collection when planning grout joint width and ordering material quantities, and should confirm current lead times with a TXD representative given the collection’s special-order status.

Product Specifications

• Water absorption: 16%
• Chemical resistance: Unaffected
• Stain resistance: ≥4
• Crazing resistance: Resistant
• Thickness: 8 mm
• Application: Wall

Frequently Asked Questions

Can different Biscuit relief patterns be combined on the same wall?

Yes. All six surfaces, Plain, Dune, Waves, Strip, Stud, and Peak, share the same 2×8-inch format, which allows them to be mixed within a single composition.

Is Biscuit rated for shower or wet-area installation?

The manufacturer provides installation guidance for humid environments like bathrooms and showers, which centers on properly waterproofing the substrate. This guidance should be reviewed before specifying Biscuit for any wet-area application.

Why might individual Biscuit tiles look slightly different from one another?

41zero42 notes that minor variation in shade and caliber occurs across the collection and is part of its intentionally artisanal appearance rather than a manufacturing inconsistency.

Does the relief pattern affect how Biscuit should be laid out?

Some surfaces, including Strip, Dune, Waves, and Peak, have a directional design, so orientation should be planned in advance, especially when combining multiple reliefs in one installation.

Can Biscuit be used on floors?

No. Biscuit is specified as a wall tile only and is not rated for floor applications.